Video Codecs

Introduction
Codec Product Lineup

Don’t hesitate to contact us via info@eu.kagafei.com or via our inquiry page.
SC2M50
- Features
- Applications
- Block Diagram
- Specifications
SC2M50 provides video encoding and decoding that support HEVC/H.265 standard. SC2M50 is a slave type codec IC controlled by host CPU via PCIe interface.
Features
- 4K/60p HEVC/H.265 real-time encoding/decoding
- HEVC encoding algorithm supporting HDR(High Dynamic Range) Video
- Low power consumption(3.5W at 4K/60p HEVC encoding) enables battery powered system
Product catalogue (AD04-00117-1E)
Don’t hesitate to contact us via info@eu.kagafei.com or via our inquiry page.
Applications
- IP video distribution
- Wireless video transmission
- Medical
- Signage

Specifications
Video | encoding | HEVC Main, Main10, Format Range Extensions (4:2:2 / 4:2:0, 8/10bit, up to 4K 60p) |
decoding | HEVC Main, Main10, Format Range Extensions (4:2:2 / 4:2:0, 8/10bit, up to 4K 60p) |
|
Audio | encoding | MPEG1 Audio Layer2 MPEG2 AAC-LC SMPTE302M (LPCM) |
decoding | MPEG1 Audio Layer2 MPEG2 AAC-LC SMPTE302M (LPCM) |
|
Stream input / output | TS input x 1 TS output x 1 |
|
Video input / output | 20bit Parallel I/F input x 4, output x 4 SMPTE-435(Square Division), SMPTE ST2036-3 (2-Sample Interleave Division), SMPTE 424M (3G-SDI),YUV 4:2:2 10bit up to 4K 60p, SMPTE 274M, SMPTE 292M (HD-SDI), SMPTE 259M-C (SD-SDI) |
|
Audio input / output | I2S x 2 | |
Peripheral interface | PCI express Gen 2.0 (4 lanes, Max payload size 512 byte) USB 2.0 Device x 1 UART x 4 I2C x 3 SPI x 2 GPIO x 64 |
|
Memory interface | Serial flash interface HSSPI x 1 LPDDR4 2400Mbps 16bits x 6 (maximum) |
|
Image processing | Video overlay (option) | |
Technology | 28nm Process / 1,361 pin FCBGA 25?? x 25mm | |
Power Consumption | 3.5W (Typical) |
MB86M30
- Features
- Applications
- Block diagram
- Specifications
“MB86M30” provides video and audio encoding, decoding, and transcoding with supporting HEVC/H.265, AVC/H.264 and MPEG2 standard. MB86M30 is slave type device controlled by host CPU via PCIe interface.
Features
- 4K/60p HEVC/H.265 or AVC/H.264 real-time encoding/decoding
- 4K/60p HEVC/H.265 encoding with 10ms ultra low latency (Option)
- HEVC encoding algorithm supporting HDR (High Dynamic Range) Video
- Low power consumption (6.3W at 4K/60p HEVC encoding) and embedding four DRAMs in package enable high density in the system
Product catalogue (MB86M30 AD04-00110-1E)
Don’t hesitate to contact us via info@eu.kagafei.com or via our inquiry page.
Applications
- Broadcasting
- IP Video distribution
- Medical
- Signage

Specifications
Video | Encoding | HEVC/H.265 4:2:2 10bit (up to 4096 x 2160p60) AVC/H.264 4:2:2 10bit (up to 2160p60) MPEG2 4:2:0 8bit (up to 1080i59.94, 1080p30) |
Ultra Low Latency Encoding *1 | HEVC/H.265 4:2:2 10bit (up to 4096 x 2160p60) Latency: 10ms |
|
Decoding *2 | HEVC/H.265 4:2:2 10bit (up to 4096 x 2160p60) AVC/H.264 4:2:2 10bit (up to 2160p60) MPEG2 4:2:0 8bit (up to 1080i59.94, 1080p30) |
|
Transcoding *3 | HEVC to HEVC, H.264 to HEVC, MPEG2 to HEVC, etc. | |
Pre-Processing | De-Interlacing, Scaling, Filtering, Video overlay | |
Multiple channel operation | Up to 4ch @HEVC/H.265 encoding, 1080p60 | |
HDR ready | ||
Audio | Encoding | LPCM, AAC-LC, MPEG1-Layer2 |
Decoding | LPCM, AAC-LC, MPEG1-Layer2 | |
Pass through | ||
Stream processing | TS MUX | Up to 4ch |
TS DEMUX | Up to 4ch | |
Interface | Control | PCIe 2.0 |
Stream | PCIe 2.0, TS-Serial Input x 4ch, TS-Serial Output x 4ch | |
Video | PCIe 2.0, Video Parallel Input x 4ch, Video Parallel Output x 4ch | |
Audio | I2S Input x 4 stereo pair, I2S Output x 4 stereo pair | |
System | Internal Memory | LPDDR4-2400 8Gbits x 4pcs |
External Memory | LPDDR4-2400 (16bit x 2ch) x 2pcs | |
Boot Device | SPI Flash | |
Package | FCBGA 74.5mm x 47.5mm |
MB86M31
- Features
- Applications
- Block diagram
- Specifications
- Deliverables for system development
“MB86M31” provides H.265/HEVC 4K60p real-time encoding by single chip. The MB86M31 is slave type device controlled by host CPU via PCIe interface.
Features
- HW base H.265/HEVC 4K60p real-time video encoder
- Support Main 4:2:2 10 profile necessary for broadcasting applications
- Support multi-channel video encoding: 1080p60 4ch, 720p60 8ch, 480p 16ch
- Low power consumption
Product Catalogue (MB86M31 AD04-00099-1E)
Don’t hesitate to contact us via info@eu.kagafei.com or via our inquiry page.
Applications
- Broadcasting
- Video capture
- Medical

Specifications
Video | Encoding | H.265/HEVC Main, Main 10, Main 4:2:2 10 profile Multi channel encoding: 4K60p 1ch, 1080p60 4ch, 720p60 8ch, 480p 16ch |
Interface | Control | PCIe Gen 2.0 |
Peripheral | PCIe Gen 2.0 (4 lanes x2, 5.0 GT/s, Max payload size 1024 Bytes, Lane reversal supported) UART (4 channels) I2C (2 channels) SPI (1 channel) GPIO (64 pin) |
|
Video | 20bit parallel interface (4 channels) support YUV4:2:2 10bit up to 4K Support embedded sync (CEA-861) |
|
System | CPU | ARM Cortex-A7 400MHz single core |
Memory I/F | DDR3 SDRAM 1333Mbps (16bitx2, 4channels) | |
Boot Device | Serial flash, Nor Flash | |
Physical | Power supply | Internal Logic: 1.2V, Analog: 1.2V/3.3V, I/O: 1.5V / 1.8V |
Operating temperature | Ta = 0 to 70° | |
Package | FCBGA-1764 (35mm x 35mm, 0.8mm pitch) |
Deliverables for system development
Evaluation board
- PCIe card form
- Support 4ch 3G-SDI input
Software Development Kit
- Including Host CPU driver, sample application (Source code)
Documentation
- MB86M31 datasheet, evaluation board schematic, board design database
- Host CPU driver, Sample application software, Control command document
Don’t hesitate to contact us via info@eu.kagafei.com or via our inquiry page.
MB8AL203x
- Features
- Block diagram
- Specifications
MB8AL203x – Multi-format HD Decoder LSI
Features
- Quad ARM® CortexTM A5 MPCore TM incl. NeonTM SIMD Engine
- Multi-format HD Video Decoder incl. HEVC
- HD H.264 Video Encoder
- 3D Engine (OpenGL® ES 2.0) ‘POWERVR SGX531-MP1’, 2D Engine
- Cipher engine with AES/DES, hash and DTCP accelerator, OTP, secure boot
- Power consumption 2.0W (typ)
- Automotive
- Temp range -40C to +85C
- I/F: MediaLB® (3-/6-Pin)
- AEC-Q100
Product Catalogue (Copyright 2017 Socionext Europe)
Don’t hesitate to contact us via info@eu.kagafei.com or via our inquiry page.

Specifications
System
- CPU: quad-core CortexA5 @ 396MHz, NEON, 32kB I$/D$ cache
- Memory: 2x 16-bit DDR3-1080 SDRAM interface
- Boot devices: NOR, NAND, eMMC4.41 or serial flash
- Standby: Power Island for deep power down
Video/Audio
- 4x Transport stream demultiplexer incl. descramblers for DVB
- CSA 3/2.1/1.0, AES/(T)DES, Multi-2, 4x TS input, 2x TS output
- Cipher engine with AES/DES, hash and DTCP accelerator
- Secure boot, control word protection, OTP & memory encryption
- Multi-format video decoder for HEVC L4.1, H.264 L4.2 HP, MPEG-2 MP@HL, MPEG 4 ASP L5, AVS Jizhun Profile, VP 6/7/8, VC-1 AP L3, RealVideo® 8/9/10, DivX® 3/4/5/6, H.263, Sorenson Spark
- H.264 video encoder up to HD resolution (depend on frame rate)
- JPEG decoder/encoder
- 2 independent video outputs. Layers (flexible order): 2x backplane, 2x video, 2x cursor, 5x OSD (up to true-color in HD resolution, two layer scalable with flicker fixer), YCrCb/RGB color space
- 3D graphic engine (Power VR SGX531); separate 2D bit blitter
- Motion adaptive HD de-interlacer
- PAL/NTSC/SECAM encoder incl. cross color, luminance filters, Teletext, WSS, CC, VBID insertion
Interfaces
- HDMI Link and PHY with HDCP and CEC controller
- 16bit digital video incl. SAV/EAV: 1x Input/1x Output (compliant to SMPTE 296M/274M)
- 24bit dig. RGB (EIA/CAE-861 compliant), 2x out or 1x out + 1x in
- ITU-R 656 video: 2x Input/1x Output
- 4x analog video DACs for YPrPb/RGB, YC and CVBS
- Stereo audio DACs, I2S: 4x input and 5x output, 1x SPDIF output
- 2x USB 2.0 with 16 end-points incl. PHY (host or device)
- Eth. 10/100/1000 Base-T GMAC (RGMII/RMII/MII), IEEE 1588
- Universal processor interface (NAND/NOR, DVB-CI/CI+, IDE, ATA)
- Universal slave interface (CI, IDE, ATA)
- MediaLB, 6-pin and 3-pin interface (MOST25/50/150)
- 128x Shared GPIO, 2x UART, 2x Smart Card, 2x I2C, 4x PWM, IR Rx, 2xSPI Master/Slave, 2x SDIO, 4x 7-segment LED, 8x Key Input
- 4 channels Analog-Digital Converter (10bit)
Package/Technology
- PBGA-484 Package/Fujitsu CMOS 55nm technology
- Operating Temperature range: -40 to +85, AEC-Q100
- Supply: 1.2V core, 1.5V DDR, 1.8V/3.3V I/O (some are 5V tolerant input) • Power Consumption: 2W (typ)
Don’t hesitate to contact us via info@eu.kagafei.com or via our inquiry page.
Supplier Profile
Company overview
- Company name: Socionext Inc.
- Foundation: 2015
- Headquarter: Shin-Yokohama, Kanagawa, Japan
- Products: Design and development of SoC with focus on Graphic Display controllers and video/image processing and solutions / services centering on SoC (ASIC)
- Company home page: http://www.socionext.com/en/
For more information, please use our contact form or send an e-mail to info@eu.kagafei.com