FMC Cards
Introduction
FMC Cards Introduction
FMC Cards (FPGA Mezzanine Card) standard are developed by a consortium of companies ranging from FPGA vendors to end users, the FPGA Mezzanine Card is an ANSI standard that provides a standard Mezzanine Card form factor, connectors and modular interface to an FPGA located on a base board.
Decoupling the I/O interfaces from the FPGA simplifies I/O interface module design while maximizing carrier card reuse.
High Pin Count Products
- HDMI 2.0 Card
- DisplayPort 1.2 Card
- 12G-SDI Card
Part Number: TB-FMCH-HDMI4K
Visit our Webshop if you´re interested to buy this part.
Features:
- 2x HDMI connectors
- 1x HDMI4K Source
- 1x HDMI4K Sink
- Compatible with FMC Specification (VITA 57.1)
- Designed for electrical compatibility with most carrier cards
- Proven operation with inrevium ACDC and KC705
- Stackable FMC design supports additional TB-FMCH-HDMI4K
User Manual
FMC Card Part Number: TB-FMCH-DP3
Visit our Webshop if you´re interested to buy this part.
Features:
- DisplayPort 1.2 Standard
- Sink/Source 1ch each
- Working with Xilinx’s DisplayPort IP
User Manual
FMC Card Part Number : TB-FMCH-12GSDI
Visit our Webshop if you´re interested to buy this part.
The 12GSDI FMC Card is designed to provide 1x input, 1x output, 3x SDI input/output + 1x Video Sync input with the connection between FMC (HPC) connector. It could expand up to 2x input, 2x output and 6x SDI input/output by using expansion connector.
The 12GSDI FMC card consists of Macom/Mindspeed’s Reclocker: M23145G-11P, Cable Driver: M23428G-31P, and Adaptive Equalizer: M23564G-11P which support up to 11.88Gpbs.
It also has two on board crystals (148.5MHz and 148.3516MHz) which each can be reference clocks. 12G-SDI FMC card provides a development platform that enables customers to process their video content such as 4k60p through a single link, dramatically increasing the amount of video processing that can be done on a single card.
User Manual
Low Pin Count Products
- MIPI FMC Card
- Pin Header Cards
FMC Card such as MIPI Connectivity mezzanine card is designed to provide to two 4lane MIPI ports which support D-PHY（CSI-2/DSI）standard with the connection between FMC (LPC) connector. PHY device: Meticom MC20901 MC2092
Features:
- MIPI FMC card
- OV13850 sensor module or DSI display or both
- CSI adapter card or DSI adapter card or both
- Reference designs available based on Northwest Logic’s MIPI IP core
| Product Name | Product Description |
|---|---|
| TB-FMCL-MIPI | MIPI FMC Card 4-lane CSI-2/DSI (Rx/Tx) |
| TB-FMCL-MIPI-2CSI | MIPI FMC Card dual CSI (Rx/Rx) |
| TB-FMCL-MIPI-CSI-SET | MIPI FMC Card 4-lane CSI-2/DSI(Rx/Tx) + CSI adapter card + OV13855 image sensor |
| TB-FMCL-MIPI-DSI-SET | MIPI FMC Card 4-lane CSI-2/DSI(Rx/Tx) + DSI adapter card + DSI display |
| TB-FMCL-MIPI-2CSI-SET | MIPI FMC Card dual CSI(Rx/Rx) + CSI adapter card + Reverse offset adapters + OV13855 image sensor x 2 |
| TB-FMCL-MIPI-CSI/DSI | MIPI FMC Card 4-lane CSI-2/DSI (Rx/Tx) + CSI adapter card + DSI adapter card + OV13855 image sensor + DSI display |
| TB-FMCL-MIPI-DIRECT | MIPI DIRECT FMC Card only |
| TB-FMCL-MIPI-DIRECT-CSI SET | MIPI DIRECT FMC Card + CSI Adapter card + OV13855 |
| TB-FMCL-MIPI-DIRECT-DSI SET | MIPI DIRECT FMC Card + DSI Adapter card + DSI display |
| TB-FMCL-MIPI-DIRECT-2CSI SET | MIPI DIRECT FMC Card + CSI adapter card + Reverse offset adapters + OV13855 image sensor x 2 |
| TB-FMCL-MIPI-DIRECT -CSI/DSI SET | MIPI DIRECT FMC Card + CSI Adapter card + DSI Adapter card + OV13855 + DSI display |
FMC Card Part Number: TB-FMCL-PH
FMC Card such as the PH FMC Connectivity mezzanine card is designed to provide conversion between FMC (LPC) connector and 2.54mm pitch pin header
Supplier Profile
Company overview
by Tokyo Electron Device Ltd
- Company name: Tokyo Electron Device Ltd
- Foundation: inrevium – since 2004
- Headquarter: Yokohama, Japan
- FY2014 Net Sales: ¥ 101,801 Million
- Products: FPGA Evaluation Boards & Platform Solutions, Market Specific IP, Design Service
- Company home page: http://solutions.inrevium.com/